Final sale. No return, refund or modification. Items non compliant with the order or damaged at the time of receipt by the customer may be refunded or replaced by BRP, at BRP’s sole discretion.
XPS Marine Spray Wax with polymer uses a nanotechnology approach with polymers and wax for superior shine and protection of your boat that penetrates and adheres better to outperform other waxes. Read the full description
Marine Spray Wax with Polymer uses a nanotechnology
approach combining hydrophobic polymers and wax to get
superior surface penetration and adhesion that shines and
protects better than other waxes. This premium product is
perfect for fiberglass, gelcoat, paint or plastic boat surfaces to
get an express shine that offers a long-lasting protective
barrier from the elements including the sun’s UV rays. Perfect
for use between complete washes and waxes, it’s safe to use
even in direct sunlight.
HOW TO USE
Shake well before use. Ensure that the boat or PWC has been
properly cleaned and is completely dry before application.
Using a dry wax applicator, apply a thin layer over gelcoat and
allow 30 minutes to dry, then wipe with a clean and dry
microfiber cloth. Product can be applied with a rotative or
orbital buffer.
RECOMMENDATIONS
Boat or PWC must be clean and free from any dirt that could
damage surfaces. This product can be used in direct sunlight
as long as surfaces are not hot.
HOT TIPS
If applied with a rotating or orbital buffer, set the speed for 3000
rotations per minute and use a soft buffing pad.
Marine Spray Wax with Polymer uses a nanotechnology
approach combining hydrophobic polymers and wax to get
superior surface penetration and adhesion that shines and
protects better than other waxes. This premium product is
perfect for fiberglass, gelcoat, paint or plastic boat surfaces to
get an express shine that offers a long-lasting protective
barrier from the elements including the sun’s UV rays. Perfect
for use between complete washes and waxes, it’s safe to use
even in direct sunlight.
HOW TO USE
Shake well before use. Ensure that the boat or PWC has been
properly cleaned and is completely dry before application.
Using a dry wax applicator, apply a thin layer over gelcoat and
allow 30 minutes to dry, then wipe with a clean and dry
microfiber cloth. Product can be applied with a rotative or
orbital buffer.
RECOMMENDATIONS
Boat or PWC must be clean and free from any dirt that could
damage surfaces. This product can be used in direct sunlight
as long as surfaces are not hot.
HOT TIPS
If applied with a rotating or orbital buffer, set the speed for 3000
rotations per minute and use a soft buffing pad.